Double cantilever · Profile 01
T-Frame solar carport.
Two rows, one column.
The T-Frame solar carport puts one column on the center line and cantilevers the truss out over both sides, so one row of columns covers two rows of parking. Site-specific PE-stamped drawings with every project.
Double cantilever · Profile 01
T-Frame solar carport.
Two rows, one column.
The T-Frame solar carport puts one column on the center line and cantilevers the truss out over both sides, so one row of columns covers two rows of parking.
Where it fits
Why a T-Frame.
The T-Frame solar carport is SDE's double cantilever design, also known as a tee. A single row of I-beam columns runs down the center line, and each column carries a canopy truss that cantilevers out the same distance on both sides. One row of foundations covers two rows of stalls, which keeps pier counts, steel and install time down on large commercial lots.
Double-loaded rows
Covers the stalls on both sides of a center line from one row of columns.
Balanced cantilever
Equal reach each way keeps loads on the column centered.
Open drive aisles
Columns sit between stalls, so aisles and door swings stay clear.
Technical overview
Four main components. Nothing extra.
Like every SDE carport, the T-Frame ships prefabbed to your module in four main components: the column, canopy truss, C-purlins and strongbacks. Crews learn it once, and every row goes up faster than the last.

Specifications
By the numbers.
Because the reach is balanced, the load on each T-Frame column stays centered under wind and snow. Values shown are typical. Final spans and foundations are set by the site-specific PE-stamped drawings for your wind and snow loads.

- Foundation
- Pier, spread footing, Hex Cage
- Max grade
- 10° N-S / E-W
- Orientation
- Portrait, 3-4-6 High
- Snow load
- 0 – 80 PSF
- Carport style
- T, Y & L-Frame
- Wind load
- 0 – 130 MPH
- Post spacing
- 24' – 27'
- Material
- Structural Steel, Galvanized
- Tilt angles
- 7° standard
- Modules
- All Tier 1 Modules
- Clearance
- 15'-0" Standard
- Warranty
- 25 years
Carport styles
Other profiles.
Need drainage to the center line, or a single row along a building? Compare the Y-Frame and the L-Frame.
FAQ
T-Frame questions, answered.
What is a T-Frame solar carport?
A T-Frame solar carport, also called a double cantilever or tee, uses one row of columns down the center line, with a canopy truss that cantilevers out the same distance on both sides. It covers two rows of parking from a single row of foundations.
Should I choose a T-Frame or a Y-Frame?
Both cover two rows of parking from one column line. Choose the T-Frame for one balanced canopy over both rows, and the Y-Frame when you want rain and snowmelt to drain to the center line.
Where do the T-Frame columns go?
On the center line between two rows of stalls. The columns sit between spaces, so drive aisles and door swings stay clear.
What loads is the T-Frame designed for?
SDE systems are designed for 0 to 130 mph wind and 0 to 80 psf snow. Final loads, spans and foundations for your site are set by the PE-stamped drawings.
Which modules and foundations work with the T-Frame?
All Tier 1 modules, in portrait orientation 3, 4 or 6 high. Foundations are concrete pier, spread footing or Hex Cage, depending on the soil and the geotech report.

Start a project
Get a stamped design for your lot.
Send us the site. We will come back with spans, foundations and a PE-stamped drawing set built for your wind and snow loads.
- PE-stamped
- Site-specific drawings with every project
- Made in USA
- 100% made in the USA, out of Marshall, Michigan
- 25-yr warranty
- Structural steel, galvanized to last
