SDE SinclairRequest a quote

Solar carports · Built Tough

Carports up faster.
Panels on sooner.

Commercial solar carports prefabbed to your module, in four main components, with PE-stamped drawings for your site.

Section · T-Frame7° tilt

Trusted by solar installers

  • Genmounts
  • Harvest Solar
  • AG Energy Co
  • Mid-America Solar
  • Sunrise Solar
100% made in USA25-year warrantyPE-stamped for every siteHot-dip galvanized steelFits all Tier 1 modulesASTM F3125 Grade A325 structural boltsMarshall, Michigan100% made in USA25-year warrantyPE-stamped for every siteHot-dip galvanized steelFits all Tier 1 modulesASTM F3125 Grade A325 structural boltsMarshall, Michigan

What customers are saying.

“First, I examined several rack systems, and these are the best I've found. They are strong, with numerous built-in tolerances, as getting massive pillars perfectly spaced, etc., is nearly impossible. I appreciated that I could easily adjust an inch in either direction on almost everything during assembly. Unlike most DIYers or professionals, I built most of my projects alone. My new home is miles from towns. That means laborers are not easy to come by. My contractor, who helped build my garage, augered the holes and leveled/aligned the pillars using his laser level. I then assembled the racks alone. The rack's superb design made assembly easy. The Sinclair Designs team was helpful and fast. When I had a question, my emails generally got answered in under 10 minutes. I highly recommend this racking system and the company itself. Excellent customer service is rare and should be recognized and celebrated when you find it. My system consists of two racks holding 36 panels each for 32,400 watts of bifacial panels.”

Michael BabigianGoogle review · a year ago

“I’m Bruce Speidel, Sedalia Colorado. I purchased the Sky Rack 2 from Sinclair Design and engineering. The process from initial purchase, providing solar module specs for mounting to the slotted steel specifically designed for the 32 panel seasonal adjustable structure, to receiving the shipment, and finally receiving the structural engineers PE stamped approved drawings executed flawlessly management and support. In a few calls, we narrowed our practical approach of installation with a general contractor whom have never installed an open rack system before, became a feather in the contractors hat! I want to specifically thank Kyle and Dunley for their expertise in helping me to compete this project. Sincerely, Bruce Speidel, retired electrical engineer.”

Bruce SpeidelGoogle review · a year ago

“Top notch company that makes a top notch product. The 90’ sky rack 2.0 went together in 2.5 hrs with 2 guys. Well engineered, strong, very intuitive design. Outstanding customer service from these guys. I had to leave a message once with customer service, and the owner himself called me back, said the phones were a bit backed up and he was helping out! What a guy, what a company. Want a great ground mount at a reasonable price, American made, that’s also super easy to learn and install? Sinclair designs is the place to get it. Hands down. Thank you guys for the great product and equally great support.”

Mike NeumannGoogle review · a year ago

From the field

Installers keep coming back.

“Speed, efficiency, a good product that’s going to stand the test of time.”
Dylan Pugh · Owner, Mid-America Solar
“We’re glad it all held together.”
Mark Dorogi · Homeland Solar, after an EF1 tornado

25 yrs

Structural warranty · every system

On site

ABSOLUTELY NO CLAMPS. Each system is custom designed to your module frame.

Every extra part is another pick, another connection and another hour on site. SDE systems arrive prepped to your module, so crews bolt together an I-beam column, canopy truss, C-purlins and strongbacks, and move on to setting panels.

SDE T-frame solar carport render

Fewer parts

Four main components. Nothing extra.

Every SDE carport is built from the same four structural pieces, so crews learn it once and every row goes up faster than the last.

SDE L-Frame, T-Frame and Y-Frame carport renders

Stamped for your site

Engineered for your wind and snow.

Each system is designed around its own site loads, up to 130 mph wind and 80 psf snow, in a T, Y or L-Frame profile that fits the lot.

Painted SDE solar carport over a parking lot

Built to last

Galvanized steel, made in the USA.

Hot-dip galvanized structural steel out of Marshall, Michigan, delivered in a painted or galvanized finish and backed by a 25-year warranty.

From the installer

Four parts. Four steps.

Mid-America Solar engineers and builds solar for residential, commercial, industrial and agricultural sites. After looking at a lot of carport manufacturers, they keep coming back to Sinclair.

  • 01Prefabbed to your moduleEvery part is made for the panel you're installing.
  • 02Arrives ready to goPieces show up prepped, so crews start building on day one.
  • 03Four assembly stepsFour simple steps from bare site to setting panels.
Solar carport construction
“Speed, efficiency, a good product that’s going to stand the test of time.”
Dylan Pugh · Owner, Mid-America Solar

Field tested

Hit by a tornado. Still standing.

An EF1 tornado touched down in Ann Arbor, tore a wall off the building next door and passed straight through a 400 kW City of Ann Arbor solar project, built on SDE carports by Homeland Solar. The carports held.

  • 01A direct hitThe tornado passed straight through the carports, not around them.
  • 02Designed with marginThe site called for 115 mph wind loads, and SDE designs carry a 1.5 safety factor on top.
  • 03Inspected afterSDE engineers checked the welds, gussets and bolt connections on site. No major damage.
Ann Arbor tornado
“We’re glad it all held together.”
Mark Dorogi · Owner, Homeland Solar

Why SDE

Faster for the crew. Stronger for the owner.

Why EPCs and installers build with SDE: carports that go up quicker than the old way, and stay up for decades.

01

Prefabbed to your module

Every part is made for the panel you're installing. Works with all Tier 1 modules.

02

Four assembly steps

Four simple steps from bare site to setting panels.

03

PE-stamped for every site

Spans and foundations drawn for your wind and snow loads.

04

Three carport styles

T, Y and L-Frame profiles for double rows, drainage or tight lots.

05

Every bolt specified

ASTM F3125 Grade A325 hot-dip galvanized bolts, with a torque value for every connection.

06

Made in the USA

Prime US steel with 50 ksi yield, 100% made in the USA out of Marshall, Michigan.

07

Built in-house

Roll forming, I-beam fabrication, stamping and CNC all happen in our own shop. Nothing is subbed out.

08

Engineers on staff

Two licensed professional engineers, with QA/QC on both the design and the fabrication side.

09

A real person answers

Call and you reach an engineer or your account manager, not a phone tree. Same-day quotes and fast preliminary drawings.

How it works

From site to steel in three steps.

01

Send us the site

Tell us where it is, how the lot is laid out, which module you're installing and any geotech report you have.

02

Get a stamped design

We come back with spans, foundations and a PE-stamped drawing set for your loads.

03

Build in four steps

Parts show up prepped to your module, so crews start building on day one.

Meet the team

Sinclair Designs. Marshall, Michigan.

Checked twice, built once.

Every part is engineered, rolled, cut and welded in our Marshall shop, then checked again before it goes on the truck. When the phone rings, one of these people answers it.

  • Kyle SinclairChief Executive Officer
  • Dunley StultsDirector of Engineering
  • Victoria WeersAccount Manager
  • Thomas ZeisserAccount Manager
  • Ian LoughrigeAccount Manager
  • Robert SibalOperations Manager
  • Lukis HustedFabrication Manager
  • Tarah RileyProduction Manager
  • Kyle BaileyLogistics Manager
Inside the Marshall shop

Our warranty

Backed for 25 years.

A 25-year structural warranty.

Hot-dip galvanized structural steel, ASTM F3125 Grade A325 bolts and a site-specific stamped design on every project. Built to stand the test of time.

100% made in USA25-year warrantyPE-stamped for every siteHot-dip galvanized steelFits all Tier 1 modulesASTM F3125 Grade A325 structural boltsMarshall, Michigan100% made in USA25-year warrantyPE-stamped for every siteHot-dip galvanized steelFits all Tier 1 modulesASTM F3125 Grade A325 structural boltsMarshall, Michigan

FAQ

Questions, answered.

What's the difference between a solar carport and a solar canopy?

Usually nothing. Solar carport, solar canopy and solar parking canopy all describe a steel structure that holds solar panels over a parking lot. SDE builds them in T, Y and L-Frame styles for commercial and utility-scale projects.

What wind and snow loads can SDE carports handle?

Systems are designed for 0 to 130 mph wind and 0 to 80 psf snow. Final loads, spans and foundations are set by the site-specific stamped drawings.

Which solar modules does it work with?

All Tier 1 modules, in portrait orientation 3, 4 or 6 high. Parts are prefabbed to the module you're installing.

What foundations do you use?

Concrete pier, spread footing or Hex Cage, depending on the soil and the geotech report. The stamped drawings call out which one.

How much clearance and post spacing?

15'-0" clearance is standard, with 24' to 27' between posts and a 7° tilt.

Do I get PE-stamped drawings?

Yes. Every project comes with a site-specific PE-stamped drawing set built for your wind and snow loads.

What does the warranty cover?

The structural steel is covered for 25 years. It's hot-dip galvanized and available in a painted or galvanized finish.

How fast do drawings and parts come back?

Quotes go out the same day, and preliminary drawings follow fast. Every part is made in our own shop, so we're usually ready to ship before the site is ready for us.

What happens after a severe storm?

We check in with customers after severe weather. After the EF1 tornado in Ann Arbor, our engineers inspected the welds, gussets and base plates on site and followed up on bolt torque.

Do you sell direct?

We mostly sell through experienced carport installers and distribution partners, because a carport is only as good as its foundations and install. Call us and we'll point you to the right partner.

Start a project

Get a stamped design for your lot.

Send us the site. We will come back with spans, foundations and a PE-stamped drawing set built for your wind and snow loads.

PE-stamped
Site-specific drawings with every project
Made in USA
100% made in the USA, out of Marshall, Michigan
25-yr warranty
Structural steel, galvanized to last